Wave solder is a welding process in which molten liquid solder,
with the help of a pump, forms a specific shape of solder Wave on the surface
of the solder tank, and the PCB inserted with components is placed on the transfer
chain, and the solder joint is realized by passing through the solder Wave peak at
a specific Angle and a certain immersion depth.
Wave soldering is divided into single wave soldering and double wave soldering.
When single wave soldering is used in SMT, serious quality problems, such as
missing soldering, bridging, and insufficient weld seams, are prone to occur due
to the "masking effect" of the solder. The dual wave crest overcomes this problem
and greatly reduces the defects such as missing welding, bridging and insufficient
weld seam. Therefore, the dual wave soldering process and equipment are widely
used in surface assembly.
Different wave soldering machine equipment has different principles, but the final
result of each component is the same. It can be roughly divided into the following parts:
4. Fixture installation
Fixture installation refers to the fixture that is installed and clamped for the PCB board
to be soldered, which can limit the degree of thermal deformation of the substrate,
prevent the occurrence of tin emission, and ensure the stability of the immersion tin effect.
5. Flux System
The flux system is the first link to ensure the quality of welding. Its main function is
to evenly coat the flux, remove the oxide layer on the soldering surface of the PCB
and components, and prevent re-oxidation during the soldering process.
The coating of the flux must be even, try not to produce accumulation, otherwise
it will cause solder short circuit or open circuit
Contact Person: Mr. Ivan Zhu