Home
Products
About Us
Factory Tour
Quality Control
Contact Us
Request A Quote
News
UNIQUE AUTOMATION LIMITED
Home ProductsWave Soldering Machine

RF 400A IR Lead Free Wave Solder Machine For SMT Welding Line

China UNIQUE AUTOMATION LIMITED certification
China UNIQUE AUTOMATION LIMITED certification
Good machine. Operate effectively with your wave solder machine. Thank you !

—— Abhijeet Saxena

Nice service!Can show me the solution in time when I have questions with machine. They are patient and kindly.

—— Mike Jasen

I'm Online Chat Now

RF 400A IR Lead Free Wave Solder Machine For SMT Welding Line

RF 400A IR Lead Free Wave Solder Machine For SMT Welding Line
RF 400A IR Lead Free Wave Solder Machine For SMT Welding Line
video play

Large Image :  RF 400A IR Lead Free Wave Solder Machine For SMT Welding Line

Product Details:
Place of Origin: CHINA
Brand Name: UA
Certification: CE
Model Number: RF-450A
Payment & Shipping Terms:
Minimum Order Quantity: 1 unit
Price: Negotiable
Packaging Details: vacuum packing for sea transportation
Delivery Time: 5-30 days
Payment Terms: T/T
Supply Ability: 25 units per month
Detailed Product Description
Control Mode: PLC + Temp. Control Meter Preheating Model: IR Tube Option : Hot Air Convection
Preheating Length: 1800 MM Transmission Method: Air Cylinder
Spraying Pressure: 0.25MPa ~ 0.4MPa Auto Flux Feeding: Optional
Weight: 1700 Kg Dimension ( L*W*H ): 4500*1400*1700
High Light:

IR Lead Free Wave Solder Machine

,

0.25MPa Lead Free Wave Solder Machine

,

0.4MPa Selective Soldering Machine

RF 400A IR Lead Free Wave Solder Machine For SMT Welding Line

 

Lead Free IR Wave Solder RF-400A Wave Welding Machine for SMT Line

 

The Solder Joint Information of Wave Soldering Machine
Wave soldering machine solder joint formation: When the PCB enters the front end of the wave surface, the substrate and the pins are heated, and before leaving the wave, the entire PCB is immersed in the solder, that is, bridged by the solder, but at the moment it leaves the end of the wave , A small amount of solder adheres to the pad due to the wetting force, and due to surface tension, a small state of shrinkage with the lead as the center appears. At this time, the wetting force between the solder and the pad is greater than the two pads The cohesion of the solder between. Therefore, a full, round solder joint will be formed, and the excess solder leaving the wave tail will fall back into the tin bath due to gravity.

 
Specifications of wave solder machine RF-450B

Model RF-400A
Operating System
Control Mode PLC + Temp. control meter
Preheating System
Preheating Model IR tube Option : Hot Air Convection
Warm Time Approx. 20/min
Preheating Length 1800 MM
No. of Preheating Zones 3
Preheating Temp. Room Temperature : ~300C
Spraying System
Transmission Method Air cylinder
Exhaust Method Upper Exhaust
Exhaust Capacity 25M3/min
Spraying Pressure 0.25MPa ~ 0.4MPa
Flux Flow Flux Flow meter
Auto Flux Feeding Optional
General
Power 380V 50HZ / 220V 60HZ
Weight 1700 kg
Dimension ( L*W*H ) 4500*1400*1700


Picture display
RF-400A 1
RF-400A 2
 
What we should concern at the operation progress of wave solder ?
1.The product should be wave soldered and inspected (after all soldering parameters reach the set value)
Place the printed circuit board gently on the conveyor belt (or fixture), the machine will automatically spray rib flux, preheat, wave solder and cool; the printed circuit board is connected at the wave solder outlet; according to factory inspection standards.
 
2.Adjust the welding parameters according to the PCB welding results
 
3.Carry out continuous soldering production, connect the printed circuit board at the exit of the wave soldering, put it into the anti-static turnover box after inspection, and send the repair board for subsequent processing; during the continuous soldering process, each printed board should be checked for soldering defects Serious printed boards should be re-soldered immediately. If there are still defects after welding, the cause should be found out, and the process parameters should be adjusted before continuing welding.

Contact Details
UNIQUE AUTOMATION LIMITED

Contact Person: IVY

Tel: +8615878724418

Send your inquiry directly to us (0 / 3000)